Matchbox Style Organizer

This was inspired by the Sparrows Reload kit.  It came with driver pins and springs in bags but I thought it would be handy to have a compact way to organize them.  This would work well for any other small parts storage.

The outer cover should be printed upright with the open end up and the drawers should be printed flat.  Support should not be used.  You should print one cover and 2 drawers (there are several drawer arrangements already made as STLs but the OpenSCAD file can be used to generate other drawer arrangements.

The current design is optimized for 0.4mm nozzle diameter with 2 walls.  There is a wall setting in the OpenSCAD file you can adjust if you want to have a different wall thickness.