Purge Bucket for TenLog D3 Pro IDEX Printer

Designed this because of hanging and dropping strands of filament.

File is for right hand side (RH). For left siode just mirror it.

Use 4 Neodyms 10x10x4mm for each container, fill them into the intended pockets. Fix them with a hump of glue, done.

You can now slide the containers during print if you want, you're not interfering the print. Best use is after or before the print. Mind the hot nozzle!

Edit-2021-06-19: Added XL PurgeBucket, wider but still fits easily. I recommend to use this one.

Print Settings

Printer:

TenLog D3 Pro

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

25%

Filament:

Definitely your choice!

Notes:

I printed the RH-version on my TenLog D3 pro, arranging the bucket on the left half of the heatbead, then run in mirror mode, thus got two printed, one right and one left part. That makes fun!