Box Utility Case for Brother P-Touch Labelprinter

I wanted to quit searching and searching for the right label-tape cassett over and over. Also as I use the printer with batteries it must be stored after I used it. Then the USB-cable always disturbed me hanging loosely somewhere.

So I decided to design this little helper to store the printer with two cassettes, I have 9mm in, 12mm in the attached pocket, 24mm in the other pocket. 9mm and 12mm have about same size. So either 9 or 12mm can stay in the printer.

For storing tape cassettes I recommend: https://www.printables.com/de/model/351907-brother-p-touch-tape-box-as-an-addition-of-my-prin

Here is a six pack for storimg 9mm and 12mm tapes.

Print Settings

Printer Brand:

Prusa

Printer: 

i3 MK3

Rafts:

No

Supports: 

No

Resolution:

0,2mm

Infill: 

25%, doesn't matter

Filament: doesn't matter PLA doesn't matter

Notes:

For the Brother script plate I printed base plate in same color, script in a different color. I choose resolution here 0.1mm

Category: Organization