Nintendo Gamecube Logo (In 3D!)

This was one of the first non-functional things I modeled about 4 years ago, and I figured I should publish it so you can print one off as well! It wasn't ripped from the Gamecube or anything like that; it was just modeled by eye in AutoCAD, so it probably isn't 100% accurate. It's definitely recognizable, though!

Print instructions

Category: Signs & Logos Summary

This was one of the first non-functional things I modeled about 4 years ago, and I figured I should publish it so you can print one off as well! It wasn't ripped from the Gamecube or anything like that; it was just modeled by eye in AutoCAD, so it probably isn't 100% accurate. It's definitely recognizable, though!

Print Settings

Printer: Folger Tech FT-5

Rafts: Doesn't Matter

Supports: Yes

Resolution: 0.2mm

Infill: 20%

Notes:

Print it out in the orientation the model is already in. Other orientations work, but the one I have will have the least amount of support material for an FDM printer.