Minimalist MicroSD Card Tool

It can be a challenge to handle the tiny MicroSD cards used in many electronics today. Many devices including 3D Printers, Drones, and Dash Cams will have a spring-loaded slot which requires you to press the small edge of the MicroSD card in to release the card. I hope this tool will help make the process easier for you! 

Both versions print in under 10 minutes and use less than 1g of filament! I recommend rotating the model on edge and printing with a brim. 

On the original (smallest size) model, I chose to use 3 parameters, resulting in a solid model with no infill needed.