SMALL CLIP / 10MIN

I modeled this clip for a small wooden box I made. I thought it may be useful for someone.

It is very easy to print. In fact, no support is needed and it prints in max 10 minutes if you use PS 0.3 mm for MK3S+.

You'll need:

• 1 x M3 x 20 HEX head screw
• 1 x M3 Nylock nut / normal M3 nut with glue
• 4 screws / I use 12 x 3 mm sheet metal screws but you may use another type of screws
  
  screw hole Ø is 4mm

How to install:

After printing all the parts I:

1. Assembled the top clip with a 20mm screw and nut
2. Eyeballed the holes by placing both top/bottom clips in the right place and marking with a pencil.
3. Made small holes ( 2mm Ø ) with Dremel/drill to not split the wood.
4. Screwed everything in place.

I'll put a little video on my IG if you want to see how it works. You find me here: @vg_st_d