Artillery Sidewinder X2 - Top Gantry Width FIX - WIP

The main problem I had with my Sidewinder X2 was that the top width of the gantry was 1.5 mm smaller than the bottom width. This means that when I set the correct tension for the Z-axis wheels at the bottom, at the top, the tension was too low and caused play.

So to correct this issue, I designed this new top gantry.

Note :

The spool holder was designed to fit an old Vertex k8400 spool holder.

Parts needed :

• 4x Carbon fiber tubes 12x400 mm (must be cut to the right length)
• Printed parts
• A bunch of M3 screws and bolts.