Foot for Tripp Lite Smart1500 UPS

This is a foot for elevating a Tripp Lite Smart1500 UPS off the floor. I'm not sure it's necessary, but I feel better having the UPS up a bit. 

The model is one inch, or 24.5mm, tall. It features a trapezoidal recess that fits onto the small molded “feet” on the bottom of the case. Print four of them, one for each corner, as shown.

Printed at .32mm layer height, 4 walls, 20% triangle infill. Probably overkill but UPSes are heavy. No supports. eSun black PLA.