Acquire Game Tile Holder

If you haven't played Acquire you should, and if you have then you know it's got 100+ tiles that rattle around annoyingly in the box. 

This model holds all the game tiles for easy storage and use. The ten square slots fit the 108 placement tiles (eleven in each except the innermost two which fit ten) and the last slot fits the seven hotel tiles. I like to store all the placement tiles face down so players can draw straight from the holder.

This was modeled in OpenSCAD and the .scad file is provided. It's not properly parameterized but the slots are resizable and adjustable (e.g. to change the wall thickness). An alternate “wide” model is also provided with twelve square slots each holding nine tiles. This variant is too large to print on a MINI+, but should fit on a MK3 or similar and appears to print in approximately the same amount of time.

It's a fairly straightforward model to print, I opted for .2mm layers and I'd suggest 10% infill.