Uniden SR30C Scanner Desktop Stand

Desktop Stand for Uniden SR30C Handheld Scanner

Print in standard upright orientation, no supports. I chose 30% infill to add some weight.

Print Settings

Printer:

Sindoh 3DWOX

Rafts:

No

Supports:

No

Resolution:

0.2 layer height

Infill:

20-30

Filament:

Black

Notes:

My first print was usable, but the back plane of the 15 degree upright support had filament melting/drooping marks...suspect due to lack of cooling from fans on the front of the hot end assembly. Depending on your setup, you may want to print in an orientation that the back of the angled support plane gets proper cooling.