Apple Mac Mini 140mm Cooling Fan or SSD Stand

Designed around the 2018 intel Mac mini that runs loud, I remove the black plastic bottom it just pops right off the 5v Noctua fan flows air through the mac keeping it cool and quiet.

I have made 3 versions with different position and size pass through holes, and 2 base stands one that sits inboard about 10mm and one that matches the upper part.

I have also provided a SSD adapter to go in place of a fan, the M1 Mac Minis dont really need extra cooling so could be a nice stand and ssd holder for the M1 as well.

Print Settings

Printer Brand:

Anycubic

Printer:

Large Size Chiron

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

I used 3 step progressive cubic at 25%

Filament: any I used Silk PLA any

Notes:

You can print it with no supports just flip the base face down in the slicer, the cable pocket will print without support I turned on Bridge mode in Cura.

When buying a fan and USB fan adapter make sure to get a 5v fan Noctua are the best you can buy.

Category: Electronics