Tyrannosaurus Rex

This model is free and took a lot of work to create.
If you appreciate this model, please leave a download and a like!
If you print this model, please post a make.

About this model

Keep your glasses safe. Guard them with a T-Rex! The neck of the dinosaur fits almost all nose bridge sizes. The dinosaur does not have any strange dents or bumps to hold the glasses. When not in use, it is a cool dinosaur statue. Glasses holders don't have to be boring when not in use.
This model is the result of a lot of trial and error, while using my own reference material for the Tyrannosaurus Rex, the pose and different types of glasses. After finishing the model, I have spent numerous hours creating a printable design. I opted for a detail level that can be fdm 3D printed without cutting the model in parts. The images used are real pictures of the printed model in a shiny filament. This is not a (fake) 3D render.

Printing

This model fits exactly on the Prusa Mini+.
Print the model at 0.15 or 0.2 mm layer height and 15% lightning infill.
I used snug support settings.

Removing the support material
Be very careful when you are removing the support material.
Cut away the support until you are about 1 cm away from small details. Do this all around the model. Then carefully remove the small supports around the details.