6mm Wheel Hub (Inspired by Pololu 1083) 4M Custom Holes

A hybrid of the Pololu 1083 wheel hub that is also compatible with hex shaped traxis wheels. Created a clamping version since PLA doesn't grip the metal well enough.

• Hub can be hammered down but will lose it's grip after taking it on and off. Use the clamp mechanism when it loses grip
• Hub uses 4Mx16 screws through the center with a 4M nut
• Hub and Adaptor is fastened together with a 4Mx6 screw.
• Adaptor uses a 3Mx10 screw (or longer) as a set screw
• Smaller hole next to it is redundant as I find screws will not create enough threading to clamp down. Maybe you'll have better luck than me