Infinite ways to create pegboard holders and bins for tools, parts or display objects. Highlights:
Note: This is designed to work with US-style pegboard (1/4" holes, 1" spaced) but I'm working on updating the design to support other pegboards requested in the comments.
Example objects:
http://youtu.be/T17yfQddx3c
GitHub repo: https://github.com/MGX3D/pegstr
Note: if you intend to use this for commercial purposes please contact me first.
Print with support! Don't worry, the support is easy to remove and if there any dimples left they will not show once this is mounted on a pegboard. You might need to play with the orientation at times.
I typically use 3 shells in the slicer, therefore 6 times extrusion width for wall thickness (typ 2.75mm), this generates very strong supports.
When printing bottom-up (hooks on the bed) you can also print without supports, and do a bit of clean-up on the straight pins (which are non-critical).
The author marked this model as their own original creation. Imported from Thingiverse.