This is a round foot for a stackable aluminium garden armchair (german: Stapelbarer Aluminium Gartenstuhl) bought from ALDI. It is made for chairs with 25mm pipes as foots.
Two variants are attached one smaller equal to the original and a larger one with a larger size. Depending on material and printer might be endangered of being cut off by the chair, also the small size sometimes causes issues on muddy or gravel ground.
This model is designed in OnShape, there are also some customizable options available: https://cad.onshape.com/documents/40c20f2494b2fb0424e820a2/w/aa378c412bae7b855e4ff4ec/e/a8a87afd3806598694aa39a2?configuration=List_ocPHhWHEKowCTb%3DWithOversize%3Bangle%3D0.10471975511965978%2Bradian%3Bfoot_height%3D0.01%2Bmeter%3Bpipe_inner%3D0.0249%2Bmeter%3Bpipe_insert%3D0.012%2Bmeter%3Bpipe_wall%3D0.002%2Bmeter
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
30
Filament: No brand PLA Blue
Category: Replacement PartsThe author marked this model as their own original creation. Imported from Thingiverse.