Runout En-Coder-Cube -- Case Back Remix for Ender X-Axis Mount

This was a quick PrusaSlicer hack.  I simply combined the trapezoidal slider from the Ender X-Axis Mount project to the Runout En-Coder-Cube "Case Back" file.

I used PETG and it was a little tight when sliding in, so I did some light sanding.  It is still snug.

This is definitely not rocket science.  I had a need for this as the way I previously mounted the sensor was interfering with taller prints.

NOTE – January 3, 2023

I have had this on for about a week.  The bowden tube that connects to the hotend loops and twists too much when it moves to the left. 

I will move my sensor back to the upper left corner of the frame and mount it with t-nuts.