Customizable Card Caddy

Card organizer for in the box storage as well as on the table top while you're playing.

The main inputs to the customizer are how big is the card and how tall do you want the caddy (so it'll fit in your game box). It'll figure out how much slant angle is needed so the cards. Also, it takes a list of stack heights, so you can easily vary the number of slots as well as have each of them be a custom height.

My original use was for storing my Catan cards. I have a nice wooden tray for playing that a friend made for me, but I also wanted a way to keep them neatly organized in the box.

Print Settings

Rafts:

Doesn't Matter

Supports:

Notes:

I used Slic3r with 0.2mm layers and 0.6mm external perimeter extrusion width in eSun natural PLA. No raft, support, or brim, just a two loop skirt.

My first use of this was to print a card organizer for my Cities and Knights of Catan box. So the default configuration is for those cards combined with the original Catan cards in this order:

5mm stacks of

blue progress

green progress

yellow progress

2mm stack of defender of catan

5mm stacks of

paper

cloth

coin

8mm stacks of

development cards

wood

clay

sheep

ore

wheat

Updates

Updated customizer computation to include effect of slant on the width of the stack of the cards thanks to @LatexPython for noticing the problem and offering a fix.

And now with an option to have an open bottom. Haven't tried that myself, but it was a request from @sygyzy