RFLink Enclosure

RFLink enclosure for the Arduino Mega 2560 + RFLink kit from Nodo Shop (www.nodo-shop.nl). It works for both 433.92 and 433.42 Mhz with the antenna.
3 x 6mm screws are use to secure the board to the enclosure.

Print instructions

Category: Electronics Summary

RFLink enclosure for the Arduino Mega 2560 + RFLink kit from Nodo Shop (www.nodo-shop.nl). It works for both 433.92 and 433.42 Mhz with the antenna.
3 x 6mm screws are use to secure the board to the enclosure.

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: 0.20

Infill: 15%

Filament: Prusament PETG
Notes:

A 10mm brim helps for the 1st layer stability.