Valkyrie Flight Stick

My new flight stick with separated axes. Inspired by the Mighty Spitfire and Tomcat.

Source Fusion 360 files will be provided once the project stabilizes.

stl and 3mf part files have also been included so you can open project files with Slicer or Prusa Slicer and see how I printed them.

Please note this is not a finished project as noted so parts might change or improve.

(JOYSTICK GRIP NOT INCLUDED. I'm using the grip from and "OLD" TM TOP GUN stick.)

More instructions and information to come....

You will need additional hardware and tools to complete this project including but not limited to:

Drill
Screw Driver
Soldering Iron
Pipe Cutter
4 heavy duty Bearings, 1 inch inner dia
6-32 type screws mostly 3/4 length
1" outter dia Aluminum Pipe cut to size.
4 Springs for cams
Wiring
Joystick Controller
Hal Effect Pots.

BL-Radial-Ball-Bearing-35JC82 QTY 4
https://www.grainger.com/product/BL-Radial-Ball-Bearing-35JC82

Aluminum Tube
Outer Dia 1'' Length 36'' (Typically sells in 36'' lengths.)

Invest in a decent pipe cutter, it will save you time and be very accurate.
https://www.homedepot.com/p/RIDGID-101-Tube-Cutter-1-4-in-to-1-1-8-in-40617/100075014

Electronics
BU0836A Enclosure (Optional)
[
http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=102&products_id=222

]

BU0836A 12-Bit Joystick Controller Board

[
http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=94&products_id=204

]

Cable with 3 pin connector plug attached - 30cm ( 12in )
QTY 3
[
http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=83&products_id=202

]

Hall Effect Rotary Sensors
QTY 2
[
https://www.digikey.com/products/en?keywords=6127V1A360L.5FS

]

Print instructions

Print Settings

Printer brand:
Prusa

Printer:
Prusa Mk2

Rafts:
Doesn't Matter

Supports:
Doesn't Matter

Resolution:
0.20

Infill:
25% or greater

Filament_brand:
Prusament

Filament_color:
Black,Orange

Filament_material:
PETG