Bottle Holder

This is a remix of a remix. Original credit goes to Pdb6251 for their excellent design. The link to their original work is https://www.thingiverse.com/thing:4652743.

I appreciate the low amount of PLA required and how fast they print. It cradles the bottles and cans perfectly no matter their shape or what bumps/indentations they have. The backstop keeps the bottles perfectly aligned and from falling off the back. The main thing I didn't like about it was the connectors would easily come apart when any kind of load was put on them. I needed something that could stay together when force is applied from above so I redesigned the connectors and increased the height of the back to keep the bottles in place.

There are two versions of this. One version has an enclosed female connector to prevent the male connector from coming out. The other version doesn't have the enclosed female connector so if you wanted to expand an existing set in the fridge, you can easily slide more in from the top. The maximum size bottle it can hold is 65mm or roughly 2.56" diameter.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

No

Resolution:

.20

Infill:

15

Filament: Hatchbox PLA Black

Notes:

No supports needed on either version.