Pokeball/Premier ball Piggy Bank

This idea was inspired by Flowalistik's Low-poly pokemon piggy bank which, you can see here: https://www.printables.com/model/234542-low-poly-pikachu-piggy-bank

I wanted to make sure it was printable without supports for ease of printing. You will have to glue the pieces together. I may redesign it to assemble without glue in a future revision. This prints about 4" in diameter, but you should be ok scaling up if you want. 

Side note: this could also be used to make a Premier ball if you printed in white and red instead. (Added pictures of one) 

Check out my other 3 versions! Greatball, Ultraball, and Masterball.

UPDATE: updated top and middle piece to make future variations easier to print in a different orientation.

If you'd like to help me out or have permission to sell physical items from my designs, please join my club!

Recommended print settings:

• 0.2mm layer height 
• Slower speed for first 6-7mm for bottom piece
• 3 perimeters
• 10% infill 
• NO SUPPORTS NEEDED but if you're struggling on the top/bottom it may help