Springfield Hellcat (standard picatinny rail) 9mm Side Light Mount

Quick and easy light access for dark nooks of the house without ever leaving your natural gun grip that wont break the bank.

requires:

2x M3x20 screws

1x M3x12 (I think that a 10 would fit)

3x M3 Nut

made to fit Olight I3T EOS but I am sure that any light that would fit with similar dimensions. The hole for the light is 5/8 or 15.875mm. Depending on how tight you get the screws to mount it should fit nice and snug, however if you wrap the back of the light or the mount with a little tap you should have a nice snug mount.

the Olight has two light modes. low isn't very bright. double clicking the back will put it into high which is plenty bright.

Here is a link for the light: https://www.amazon.com/gp/product/B07DLRK7Q5/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07DLRK7Q5&linkCode=as2&tag=learningasw05-20&linkId=e94aa1ce5bbc4996fcbe5dc69ea7babc

I printed in PLA (SUNLU white) with 30% infill and no supports. Not sure how it holds up to firing and I have heard that PLA will also loosen with time. I would recommend PETG or ABS.

Will upload a left hand if some one requests it.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

no

Resolution:

0.2

Infill: 

30%

Filament: recommended PETG or at least PLA+

Category: Sport & Outdoors