Unicorn Sun Catcher

The Frame is printed in clear for the first 0.5mm then with black from for the next 1mm.

I printed the horn in solid white and the other colours in translucent colours. If you don't have those you could try solid colours but half the thickness, not sure if that would work though.

I've given the coloured bits a 0.1mm clearance all around, this should be sufficient for almost all printers / filaments.

Print instructions

Unassociated tags: wall art

Category: 2D Art Summary

The Frame is printed in clear for the first 0.5mm then with black from for the next 1mm.

I printed the horn in solid white and the other colours in translucent colours. If you don't have those you could try solid colours but half the thickness, not sure if that would work though.

I've given the coloured bits a 0.1mm clearance all around, this should be sufficient for almost all printers / filaments.