Printed with PETG Jet Black Prusament at 0.2mm layer height.
The resulting parts have a quite tight fit when assembled , but you get well working spares!
Printed with PETG Jet Black Prusament at 0.2mm layer height.
The resulting parts have a quite tight fit when assembled , but you get well working spares!
@OBA_97489
Thank you for your feedback ;)
@Regis Thanks for providing this model. Very useful!
What kind of thread type is used is it like M28?
@thepfrank_219967
The thread type I used is M27x2 ;)
@EzehielT_1296928
Thank you for your feedback ;)
@Mawerick_478469
Thank you for your feedback ;)
Passt perfekt! :-)
@Michael_145422
Thank you for your return ;)
Works well! Printed with PETG 0.6mm nozzle and 0.4 layer height.
@SamiKassimaki_813627
Thank you for your return and for the photo ;)
Exactly what I was looking for. Had a little bit stringing issues but hope it will fit anyway. Thanks!!
@CLOUDLR_647365
Thank you for your return and for the photo ;)
@Blocker
Thank you for your return and for the photo ;)
@InspirationBricolage
Thank you for your return and for the photo ;)