Voron 0.1 Splitted Backpanel with Fan

Voron 0.1 Splitted Backpanel with 120x15mm Fan for cooling electronics (RaspberryPi and SKR E3/stepper driver etc)

2.5mm thikness + form tape

• M3 heatset x4
• M3 20mm x4
• 1mm Formtape
• 120x15mm fan (12V is most popular for PC use) 
   

1. Apply foam tape along the edges and the guide (backpaneltop).
2. Fix fancover/fan/backpanelbototm with M3 bolt.
3. Fixed with same way of original panel

I use 12V popular PC fan in 5V supply from Voron 0.1 DC/DC Converter. The fan is now about 41% speed. This is sufficient cooling. Some fans may not start at 5V, so it is recommended to test before using 12V fans.