BabyDan No Trip Safety Gate - stopper for one-way opening
This is a stopper to enable one-way opening on BabyDan No Trip Saftey Gates.
0
31
0
309
updated
March 13, 2023
Description
PDFI'd lost the stopper to prevent the gate from opening in both directions, so I thought I'd design and print my own. Hopefully others will find this piece useful too.
I printed this as follows:
- Material = PLA
- Layer height = 0.2mm
- No supports required
- 15% infill
It may be compatible with other BabyDan models, however I've only been able to test with a No Trip Safety Gate
Tags
Model origin
The author marked this model as their own original creation.
