V5 For P1P and X1C As this is skipping the LIDAR but keeping the Bed Leveling if desired.
Date : 5 March 2023
Improvements:
-Improved the overall speed of the start gcode
-Reduced the purge of filament by a factor of 21 times 5mm vs 105mm
-Changed the load line to a minimal 5mm in front of the bed
-Doubled the first quick Z Homing to increase precision
-Introduced a scrap function in between the two Z Homing to get rid of any residue filament at the nozzle extrusion end
-Deleted steps that were useless and/or redundant
-Fixed the bug where the hotend was going at 140°C despite not checking the Bed Leveling and the Calibration steps
-Turned off the loud chamber fan
-Optimized overall heating cycles
-No more cooldown of the hotend during start
-Going straight to printing after print that was already Bed Leveled and Calibrated
If Bed and Hotend are stil hot from previous print
You can reach a start GCode of under ONE Minute
Happy printing <3
If you already Calibrated and Bed Leveled in a previous print it is useless to repeat these steps until you change filament or turn off the printer.
To use this fast start gcode please do not tick the Calibration & Bed Leveling options before printing, or just Bed Leveling with the matching profiles.
To use my new gcode start sequences simply open the .3mf file and use one of my 4 profiles Fast Start .4 or Fast Start .4 + Level or Fast Start .4 + LeveL - EndRetractAMS or Fast Start .4 - EndRetractAMS in the Printer Presets at the top left of Bambu Studio, then you can save them in your user presets to use them outside of my .3mf file in your future projects
WARNING, Try this at your own risks
You are responsible of your own actions. This is modified machine instructions start sequence and is not officially supported by Bambu Lab, I'm just a user sharing my improvements.
To use this with a 0.2 or 0.6 or 0.8 nozzle, just copy my start gcode and paste it into a new custom profile created from the desired diameter.
If you want to support me, you can always buy me a coffee.
The author marked this model as their own original creation.