6 Spoke RC Drift Wheel - 12mm hex - 55mm OD

One piece wheel and tire for drifting. 1/18 scale to fit on Traxxas' LaTrax or similar models (like Tamiya M series ) . 

It prints fine with a 0.2mm layer height. Achieve best results by printing the wheel face up with black material. No supports are needed for the spokes but the central hex and surrounding hub interface will need supports. Example is printed from black ASA with 0.2mm layer height and finished with a silver paint pen. 

Unusual but in this case I recommend using randomly placed seams to avoid a flat-spot or bump on the wheel. 

Style note: the tire sidewall dimensions are scale to a 12in wheel on a classic mini and the wheel is loosely styled after a Rays Volk TE37.