LCD cover and stand

Cover and stand for an LCD panel I salvaged from a broken laptop (Lenovo N581 with 1366x768 px). LCD dimension is 31 x 20,8 x 0,7 cm.

Controller box is designed for M. NT68676 2 HDMI DVI VGA LED LCD Controller board
The controller box is the only part where support is needed for the clip overhangs.

(Clamp and stand need to be printed twice)

You will need 6 standard PC mainboard screws (6-32) for the controller board, but other than that no additional screws or glue is needed. The clamps and cover will hold everything together.

Building a cheap workshop setup (LCD "free or ~500€(laptop), depends on view ;-)", 2€ PETG, ~100€ Pi4+Key+Mouse+Cable+Cooling)

Pi4 cooling case: http://s.click.aliexpress.com/e/rnLdVeYs
M.NT68676 HDMI display controller: http://s.click.aliexpress.com/e/LQHpR6EM

PS: Ignore the two Pis in the background (last pic), they are not related to this project (part of my home automation).

Print instructions

Rafts: No

Supports: Yes