SKR 2 Bracket for CR-10 V2/V3

This bracket will fit into the stock electronics box for the CR-10 V2/V3 where you can install a BigTreeTech SKR 2 mainboard. Secure the bracket onto the stock mainboard standoffs with a bit of double-sided tape and attach the SKR 2 board with the stock M3 button-head screws.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.2mm

Infill:

Filament: Generic PLA, ABS, PETG Any color