Commodore C64 The Expert Trilogic cartridge housing case

Next of the C64 cartridge's housings collection. This time I designed case for The Expert cartridge by Retrotinker/Dirk Wouters. Take a look on attached pictures. The case can take an ICs in a sockets, up to 10mm high.

In the slicing software I added a decorative strip to the case but it is not obligatory. However, if you want the inscription and logo to be clearly visible, use one layer with a contrasting colour as its background.

You may find two versions of upper shell - plain one is designed for those who want to reproduce the original cartridge sticker.

This project was developed in collaboration with Jason_M: https://www.printables.com/pl/social/6073-jason_m/about

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Supports:

Yes

Resolution: 

0.15

Infill:

20%

Filament:

Plast Spaw PLA

Multicolor

Notes:

Print the case halves face up and use the supports for the inside. I suggest to use 3-4 perimeters.