Puzzle box

This is a puzzle box that could easily serve as a "piggy bank" or as a nice gift.

I took the original design of Adrian Melendezat from GrabCAD (https://grabcad.com/library/snapsat-1u-1) and modified it to fit my needs (with Solidworks).
I also added text on the plates to make it a customized gift for a friend.

The pieces should fit snugly and thus making a sturdy frame.

If you make one of your own, please share it with me ;)

Print instructions

Category: Puzzles Summary

This is a puzzle box that could easily serve as a "piggy bank" or as a nice gift.

I took the original design of Adrian Melendezat from GrabCAD (https://grabcad.com/library/snapsat-1u-1) and modified it to fit my needs (with Solidworks).
I also added text on the plates to make it a customized gift for a friend.

The pieces should fit snugly and thus making a sturdy frame.

If you make one of your own, please share it with me ;)

Print Settings

Printer: Mendel90 DIY (Nevex)

Rafts: Doesn't Matter

Supports: Doesn't Matter

Resolution: 0.2mm

Infill: 15%

Notes:

Supports aren't needed if the plate is printed with the front side on the build plate. Otherwise you shoud add supports as the middle clip is slightly shorter and thus will float in the air with no supports.

Notes

No supports needed here (just a little bridging, but should be no trouble).

Supports are necessary on the middle clip, because it's a bit lifted from the build plate.