Gas Metering Device - Housing for PCB

Introduction

This is a housing for a gas metering electronics device. It can be used together with Gas Metering Device - Sensor Housing for Reed Switch.

Printing

The gcodes are ready to print.

If you use the STL files I recommend to add a cylinder volume in the slicer program for both stands of the lid. Use height of 9mm. 

Use 3 perimeters.

Printed in PLA.

Change it to your needs

Don't hesitate to change the housing to your needs. An OpenSCAD file has been attached.

Home automation

The sensor can be connected to various home automation devices, I plan to use it in an Homematic environment, see Gas Metering.

Disclaimer

Use the housing on your own risk.