Fast Calibration Cube (Speedcube)

This calibration cube can be printed fast and provide some good information about your print quality.

The settings should be:

2 bottom layers

2 top layers

1 perimeter

0% infill

It can be printed in about 10 minutes and  will provide the following info:

First layer quality and elephants foot - looking at the Z at the bottom of the cube

Ringing - on the sides of the cube with X, Y

Over and under extrusion - on the smooth sides of the cube

Bridging and top layer quality - on top of the cube

Dimensional accuracy - measuring the cube with calipers

Since they are really fast to print, it is also a good way of making samples with your filament.