Hanging Utensil Holder

Hanging utensil holder. Holds 12 kitchen utensils.

Overall height is 78mm (3 in)

Longest width is 143mm (5.6 in)

Base is 102mm (4 in) square.

The holes came out a little undersized on my printer for the insert but are easily drilled. I ended up using a 9/64" drill bit.

Parts list: M3 threaded insert Ball Bearing (3mm X 8mm X 4mm)

M3x30 pan head screw

4x wood screws to mount.

Print Settings

Printer Brand:

FlashForge

Printer:

Creator Pro

Rafts:

Yes

Supports:

Yes

Resolution:

0.16

Infill:

10%

Filament: FlashForge PLA Black

Notes:

I used a raft and supports on the hook spinner but only a brim on the down rod piece.