Sunlu Filadryer S2 filament guide and moisture vent with Bowden passthrough

I liked the original minimalist design of the wedge, but ran into some issues with it not staying secured to the Bowden tube and the dryer itself, so I added 2 set screws for holding onto these parts.

I also added a M6 tap for a Bowden passthrough.

This remix is not without its issues - the internal tube doesn't have the space to straighten out before hitting the passthrough, so filament sometimes requires a bit of coaxing to get through.

I'm already pushing rope uphill with the mix of STL and OpenSCAD, so I likely won't ever get to it unless it becomes a serious problem.