QX95 camera angle plate, 10°, 15° and 20°.

Camera angle plate for the Eachine QX95 quadcopter.
It simply slides under the camera using the original rubber band attachment and still allows it to be moved in hard landings.
There are models for 10, 15 and 20 degree angle.

The nut in one of the pictures is an M3 for size compare.
The one mounted on the quadcopter is the 10 degree one.

Print instructions

Category: R/C Vehicles Summary

Camera angle plate for the Eachine QX95 quadcopter.
It simply slides under the camera using the original rubber band attachment and still allows it to be moved in hard landings.
There are models for 10, 15 and 20 degree angle.

The nut in one of the pictures is an M3 for size compare.
The one mounted on the quadcopter is the 10 degree one.

Print Settings

Printer: Anet A8

Rafts: No

Supports: No

Resolution: 0,1

Infill: 100

Notes:

Printed in PLA at 205°C on an Anet A8 with 0.4 mm nozzle on a heated glass bed at 60°C.
The ones in the pictures are printed with 0.05 mm layer height but that is overkill, 0.1 will do just fine. Possibly 0.2 as well but these things are tiny so that will affect the resolution on the angled bit.