Arcooda PCB Side Panel Support

Inspired by djcalle's feet design for the Arcooda 20.1" LCD monitor, I decided to design an addon support for its controller PCB. It bolts directly onto the same holes. You need however to swap two of M5x14mm bolts with two M5x25mm bolts with 2 more nuts.

The board will require also two M3x16mm bolts and nuts to hold the pcb in place.

Print setttings: No support, 100% infill

Required: 2x M5x25mm with nuts, 2x M3x16mm with nuts.

Enjoy!

Big Thanks for djcalle for creating the Arcooda feets.