Bit for FORA head - Updated

Made to fit in the glowplug hole for holding on to a head so then head can be cleaned faster in a chordless drill.

UPDATE: I found a small mistake in the STL file, I have updated it with the new one

Print Settings

Resolution:

variable

Infill:

15% or higher

Filament: Any PETG

Notes:

I prined at variable layer hight, so I would have a very fine layer thickness for the threads.

I printed it standing (threads on top), with a brim to increase the area on the build plate, a few times the object broke free and the print failed.

Category: Hobby