Wiko Darkfull Bike Mount

This thing is a very sturdy bracket to mount your Wiko Darkfull to your bike. It should also work with any other phone of similar dimensions. So far this design has held up in ~50km of road testing and at no time had the phone moved at all.

Note, that the original uploader of the files, that this thing was created from, also included FreeCAD-files to adapt your own.

Instructions

I changed the mounting procedure to a more removable velcro-strap, 20mm wide. Inserting the "bottom" part into the main piece is deliberately tight and required a few gentle hits on the workbench.

Tube diameter on this one is 35mm, phone dimensions are 71.5mm wide, 9mm thick, 143.5mm long.

I would recommend inserting a piece of rubber (I used a cutout of a latex examination glove) between the holder and the tube to prevent any sliding around the tube.