Dental splint case with magnet

Made a simple case with magnetic closing mechanism for a dental splint/bite-guard. Inside heightspace is 16mm. I used a large paperclip as a hinge connector, just bend it straight and push it in. Stop the print at 9.80mm height and insert the magnets in the right direction, additionally use some superglue to keep them in place.

DON'T use the “fix STL through the Netfabb” function in PrusaSlicer. It will fill the magnet inserts. 

Used magnet: Ø8x4mm

Used paperclip: Ø1.1x65mm

Prusament PLA Opal Green
Nozzle: 0.4mm
Layer height: 0.15mm

If you have any questions just ask and let me know what you think!

Happy printing  (: