Modular Kallax: A modular mounting system for IKEA KALLAX shelf series

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5713438.

Concept

A mounting system for IKEA KALLAX shelf.

Usage

You will need to print:

• [1x] Center Mount 
• [1x] (whatever part)

You will also need a countersunk M5x12 (or M5x10) screw to connect the two parts together.

Updates

2022.12.14 - Initial release. NEW: Center Mount v1, Headphone Holder v1

2022.12.15 - NEW: 4-Way Cable Clip v2

2022.12.27 - NEW: Center Mount (Short) v1, Adapter to HeyVye Modular Mount System v3, Controller Holder v1, 100mm Split Mount v1, 130mm Split Mount v1

2022.12.28 - UPDATE: Controller Holder v1 to v4

2023.07.14 - Description update to mention requiring a countersunk screw.

History

Was looking for a headphone holder that mounts to the cross/center part of a IKEA KALLAX shelf, but since I didn't find one, I thought I'll make one myself. Maybe someone will find this useful as well. Might add more modules

My Print Settings

Printer Brand: Creality

Printer: Ender 3 Pro

Rafts: No

Supports: Check part instructions

Resolution: 0.12 ~ 0.28

Infill: 40% ~ 100%

Filament: SUNLU PLA Silver

Notes:

Center Mount - Print vertically with the "legs" on top. Supports are required.

Headphone Holder - Print vertically. Supports are optional (highly not recommended).

4-Way Cable Clip - Print as is (sideways). Supports are required.

Center Mount (Short) - Print vertically with the "legs" on top. Supports are required.

Adapter to HeyVye Modular Mount System - Print with the three holes flat side down. Supports are required.

Controller Holder - Print with the mounting hole down. Supports are required.

100mm Split Mount - Print with the flat side down. Supports are required.

130mm Split Mount - Print with the flat side down. Supports are required.