Table leg holders

These table holders are great for a small appartment work bench. I printed these so that I could make a small table that I could be eaily be taken down and stored in my appartment. I used two 1" X 3" glued together as the legs. The table top is 1/2" MDF.

There are 2 diffrent sized parts in the picture, I used the same file and just scaled the Z axis down to 80%, honestly the smaller ones hold just as well as the larger one and I would not even mess with the larger ones. Also I would recomend 3/4" MDF as the 1/2" is a little flimsy.

I printed with 50% infill and that is plenty strong no need to go any more than that.

Print Settings

Printer Brand:

Anycubic

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2

Infill:

Filament: Matchbox PLA any