Santa sleigh with style - NO supports needed

Elegant sleigh with built-in decorative elements. most of my hard work went to make sure you'll be able to print it easily - no supports or rafts needed, just a tiny bit of glue.

I made 0.5 tolerances, so the parts should easily fit, even if your printer is not accurately calibrated.  as you can see in the pictures, I added a small niche to hide that gap, so you even won't know the gap is there, once assembled.

Printing:
Printed using PLA, resolution 0.2, 10% zigzag fill. go slow when printing the first 4 layers of the frames due to the silhouettes - they are gentle and you want them to stick to the bed.

ornaments/silhouettes are gentle (1mm thickness). let the bed cool before pulling the railing out (or go very slow with it)

Gluing tip:

Glue the right wall to the right railing, and later glue the body to it. that way both body parts gets aligned perfectly.

Hope you'll like it and post your makes

Merry Christmas!