Spray Can Rack Improved

I loved Bizzar's optimized remix of this, but found he left some room on the table to reduce print time and plastic use, so I removed the nonfunctional extended curved area near the mounting screw.

This change allows me to fit 7x onto a 152x154 mm build platform, and I think it is now even more aesthetically pleasing :)

Simplify 3D usage notes (FiveAngle / Bizzar / Mostlighting):

• Build time (minutes): 27 / 28 / 31
• Fillament used (mm): 3526.0 / 3586.3 / 3866.2
• Plastic weight (g): 10.6 / 10.78 / 11.62

• Cost ($USD): 0.267 / 0.272 / 0.304
  Because #statistics

  Enjoy !

Print instructions

Unassociated tags: spray can

Category: Organization Summary

I loved Bizzar's optimized remix of this, but found he left some room on the table to reduce print time and plastic use, so I removed the nonfunctional extended curved area near the mounting screw.

This change allows me to fit 7x onto a 152x154 mm build platform, and I think it is now even more aesthetically pleasing :)

Simplify 3D usage notes (FiveAngle / Bizzar / Mostlighting):

• Build time (minutes): 27 / 28 / 31
• Fillament used (mm): 3526.0 / 3586.3 / 3866.2
• Plastic weight (g): 10.6 / 10.78 / 11.62

• Cost ($USD): 0.267 / 0.272 / 0.304
  Because #statistics

  Enjoy !

  Print Settings

Rafts: No

Supports: No

Resolution: 317.5 microns

Infill: 17%

Notes:

• Shells: 3
• Interior Infill: Triangular
• Exterior Infill: Concentric
  Standard 1-1/4" drywall screw spaced one every 7 racks secures perfectly.