Luminous Christmas Ornaments

If you choose the files (.gcode) to print it is necessary to follow a printing order.
Start by printing the file with the name P1 example (Sphere(Merry)-P1) when you finish without removing the printing plate, change the color of your filament and send the following file to print. example (Sphere(merry)-P2).

If you choose to use the (.3mf) files you will see the following settings.
in the P1 files.
layer height; 0.2mm
perimeters; 1
elephant foot compensation; 0
Z jump; 0.2mm

for P2 files

layer height; 0.2mm
perimeters; 3
elephant foot compensation; 0
Z jump; 0.6mm