Star Topper - Customizable - Keanu Reeves

Have you ever wondered, what if Keanu Reeves was more than a movie star? 

Well that is what my friend did, so he asked me to turn him into a star for his Christmas tree. 

Of course you don't have to go with the silly choice of Keanu Reeves you can also design your own lithophane and add to the blank insert

The model is Based of the Star Topper with lights by Brian Zak

For my Remix i decided to use a Regular 5V led strip inside of the star, to illuminate the lithophane face.

The parts needed to recreate this:

• 5v Led strip 50cm
• 10 cm wire 
• Micro Usb power board
• 10 magnets - 10x2mm

Assembly

1. Print two halves of the star
2. Print the lithophane insert with Keanu reeves or design your own lithophane and add to the blank baseplate.
3. Glue magnets into the Star halves
4. Solder Led Strip to wires and Micro Usb board
5. Add Leds to the inner rim of a star half
6. Glue Usb board to the inside of the star topper to hide the connector

TIP: For the most optimal prints print it all lying flat on the build plate and use only supports touching build plate for the star halves