The model is easy to print and easy to assemble. You will need:
- the printed files
- some glue
- a piece of filament of the same color
1. Print the necessary models.
2. Glue the marked surfaces shown in the picture. Firstly fit the 2 middle elements in the appropriate place of the upper part
3. Fit the 2 sled feet to the places shown in the picture. (it is worth waiting for complete drying on the edge of the table)
4. The small piece of filament must be threaded through the holes and cut to size (if you want, you can also fix the ends with a dot of glue)
5. Enjoy! :)
The author hasn't provided the model origin yet.