Nextion 3.5 inch screen project box with usb cable power opening

project box supporting:

a Nextion 3.5 inch display

an esp32 dev kit 1 board

a wemos 18650 battery shield v3

with an opening for usb power cable

NOTE: there are two .stl files, one with posts for an EDP32 DOIT V1 board, another for an ESP32 board that is shorter

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

.2

Infill: 

15

Filament: Prusament PLA  
 

Notes:

do not repair this stl (at least with Prusa Slicer 2.1 and Netfabb), as doing so incorrectly causes the Nextion screen opening to be sealed closed.

make sure you measure the length of your esp32 board and print off the right box

Category: Other