Micro & SD Card Box V2

• Fixed the "lock" .. the piece that catches the lid. It's no longer standing with no support from behind. Mine easily broke, and some other dudes reported the same in the comments on the original model.
• Added a rectangular hole to help open the lid.

If printing with thicker layers like myself (0.28mm), increase the model scale by 2 to 4% to give enough spice for the cards to fit.

Print settings:

Creality Ender 3 V2 Neo - using Cura + Filament Friday Extra Fast 0.28 profile with 10% infill. No support needed.

Print time:

~ 3hr 20 minutes - PLA.